Texas Well Plugging and Abandonment: RRC Requirements Owners Should Know

Every oil or gas well has an end. In Texas, plugging and abandonment (P&A) is a regulatory duty overseen by the Railroad Commission of Texas (RRC), not only a field job. Owners who postpone that conversation sometimes find themselves with inactive wells, missed deadlines, and a more expensive problem than a planned plug.

This article is a general overview of how Texas plugging requirements work, what Statewide Rule 14 expects, and how owners should think about cost and timing. It is not legal advice, and it is not a substitute for the current Commission rules, forms, and district-office guidance. Rules change. Always check the RRC’s published requirements for the wells you own.

Why plugging matters

The purpose of plugging is to protect usable-quality groundwater and to isolate oil, gas, and other potential sources of pollution in the wellbore. An unplugged or poorly plugged well can create environmental risk, regulatory exposure, and a cloud on any later sale or transfer of the lease.

Working-interest owners typically share in plugging costs according to their interest and their contracts. Royalty owners generally do not bear those costs. If you hold a working interest, plugging is part of the life cycle of the well, not an optional extra.

Statewide Rule 14, in plain language

Texas plugging standards are set out in Statewide Rule 14, which is 16 Texas Administrative Code §3.14. In general terms, the rule requires that:

  • The operator give the Commission notice of intention to plug, on the current form, and obtain approval of the proposed procedure before work begins. District-office timing rules apply, including advance notice and a further notice shortly before operations start.
  • Surface owners (or residents, in the circumstances the rule describes) receive notice of the planned plugging.
  • The well be plugged so that formations bearing usable-quality water, oil, gas, or geothermal resources are protected, typically with cement plugs set according to the approved procedure.
  • Plugging operations be directly supervised at the well site by the operator or an authorized representative who is not an employee of the cementing company.
  • A verified plugging report be filed after the work is completed, within the time the rule requires.

The approved procedure for a given well depends on its casing record, depth, and geologic and groundwater conditions. There is no single plug design that fits every well, which is why the notice and approval steps exist.

The one-year inactive-well clock, and extensions

As a general rule, plugging operations on a dry or inactive well are expected to begin within one year after drilling or operations cease, and to proceed with due diligence until completed. Operators who need more time may be able to obtain a plugging extension, but an extension is not automatic.

Extensions typically depend on the operator remaining in good standing (including a current organization report), having a good-faith claim to operate the well, keeping the well and associated facilities in compliance, and meeting additional inactive-well conditions the Commission currently requires. Those conditions can include tests, financial security, surface-equipment cleanup, and filings on the Commission’s current extension form.

The details and options change over time and can vary with the age and status of the well. Do not rely on an old understanding that a well can “sit idle.” Review current requirements on the Railroad Commission’s website or with counsel.

What well owners should plan for

Even if a contract operator handles the filings and the rig, owners should expect to make decisions and to pay their share. Useful planning questions include:

  • Which wells are producing, shut in, inactive, or already past a regulatory deadline?
  • Who is the operator of record, and is that operator in good standing?
  • Is there a current casing record and well history sufficient to design a plug?
  • What surface-equipment removal and site restoration will be required?
  • How will costs be estimated, approved, and billed among working-interest owners?
  • If the well is not being plugged yet, what is the plan for maintaining a valid extension, if one is available?

Costs vary widely with depth, location, well condition, and whether problems are found during the job. Be cautious of any quote that is not based on the actual well and a procedure the district office can review.

How Mokan Operating can help with P&A

Mokan Operating, based in Spicewood, Texas, helps owners plan and carry out plugging and abandonment work and the related filings. That can include reviewing well status, preparing a proposed procedure, coordinating notice and field supervision, and working through site cleanup after the plug.

We also talk with owners who are not ready to plug and need a clear picture of their options — including whether a workover or a return to production is realistic, or whether an inactive well is accumulating regulatory risk. See When to Hire a Contract Operator and Oil Well Workover Basics for those related conversations.

Call us before a well becomes a larger problem

If you have a well that is shut in, inactive, or clearly at the end of its life, call Mokan Operating at (325) 773-9073 or email info@mokancapital.com. Tell us the county and the well or lease name, and we will discuss what information is needed to review plugging or extension status with you.

Mokan Operating is in Spicewood, Texas. For official rule text and current forms, start with the Railroad Commission of Texas.

This article is a general overview of Texas plugging and inactive-well requirements. It is not legal advice, not an official RRC interpretation, and not a promise of a particular cost, timeline, or approval. Operators and owners should rely on current Commission rules, forms, and district-office guidance, and should consult counsel when needed.

  • November 18, 2026
Click Here to Leave a Comment Below 0 comments

Leave a Reply: